|
Statewide Work Zones
Counties:
|
|
|
|
|
|
|
Let us know how we can improve. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
| |
|
|
All work subject to change due to weather or priority adjustments. Motorists are urged to exercise caution while passing through work zones. Workers may be on or near the roadway. Signs will be posted and flag persons will be present in areas where traffic will be impacted. Please contact the MoDOT Customer Service Center by calling the toll-free number 1.888.ASK.MoDOT (275.6636).
Receive FREE email updates
PDF File: Week of August 2nd
Return to top
Carter County
Roadway Maintenance
Carter County & Shannon County
Contractor Crews
Route 60:
Contractor crews will be constructing shoulders. While performing this function, crews and
equipment are located directly on or near the roadway. Motorists are urged to exercise caution when
moving through the work zone.
Location: From the intersection of Route C in Carter County to the intersection of Route U in
Shannon County.
Crawford County
Roadway Maintenance
Return to top
Crawford County & Washington County
Roadway Maintenance
Route N:
MoDOT crews will perform chip-seal resurfacing on roads that are in generally fair to better
condition. The benefits include crack sealing, increased skid resistance and correction of minor
rutting, which extends the life of the pavement in a cost effective way. Motorists should plan ahead
and allow extra time due to a one-lane restriction. Work zone signs, flag persons and a pilot vehicle
will be used during this operation. MoDOT urges motorists to proceed slowly through the work zone,
especially while driving on the fresh-laid surface.
Location: From the intersection of Route JJ in Crawford County to Route 185 in Washington
County.
Dent County
Roadway Maintenance
Route CC:
MoDOT crews will be replacing drainage pipes near the roadway. Pipes periodically need replacing
to maintain proper drainage.
Location: From the intersection of Route C to the intersection of Route H.
Route F:
MoDOT crews will be paving over the roadway surface to restore a smooth ride. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: From the intersection of Route 32 to the intersection of Route E.
Route P:
MoDOT crews will be paving over the roadway surface to restore a smooth ride. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: From the intersection of Route 32 to the end of state maintenance.
Howell County
Roadway Maintenance
Route 160:
Contractor crews will thin life overlay pavement surface. While performing this function, crews and
equipment are located directly on the roadway. Motorists are urged to exercise caution when moving
through the work zone.
Location: From the intersection of Route 101 to the intersection of Route JJ.
BUSINESS – BYPASS Route 60:
MoDOT workers and equipment will be located on the roadway while performing work to improve
surface condition. While performing this function, crews and equipment are located directly on or
near the roadway. Motorists are urged to exercise caution when moving through the work zone.
Location: BUSINESS - BYPASS - From the intersection of Route 76 to the intersection of County
Road 5900.
Howell County & Oregon County
Roadway Maintenance
Route 160:
MoDOT crews will perform chip-seal resurfacing on roads that are in generally fair to better
condition. The benefits include crack sealing, increased skid resistance and correction of minor
rutting, which extends the life of the pavement in a cost effective way. Motorists should plan ahead
and allow extra time due to a one-lane restriction. Work zone signs, flag persons and a pilot vehicle
will be used during this operation. MoDOT urges motorists to proceed slowly through the work zone,
especially while driving on the fresh-laid surface.
Location: From West Plains, Mo. city limits in Howell County to the intersection of Route 99 in
Oregon County.
Return to top
Iron County
Roadway Maintenance
Route 143:
MoDOT crews will do bridge maintenance to improve the section where the road and bridge meet
and prevent deterioration of the bridge deck or structure.
Location: The bridge located over Big Creek.
Route 21:
MoDOT crews will do bridge maintenance to improve the section where the road and bridge meet
and prevent deterioration of the bridge deck or structure.
Location: The bridge located over Carver Creek.
Route CC:
MoDOT crews will perform drainage work to keep the roadway dry and maintain stability and proper
drainage of water from the travel lanes. Crews will also perform edge rut repair work, which requires
placing material at the edge of the roadway and is necessary to reduce shoulder drop off. While
performing these functions, crews and equipment are located directly on or near the roadway.
Motorists are urged to exercise caution when moving past the work zones.
Location: From the intersection of Route 21 to the end of state maintenance.
Return to top
Oregon County
Roadway Maintenance
Route 99:
MoDOT crews will perform chip-seal resurfacing on roads that are in generally fair to better
condition. The benefits include crack sealing, increased skid resistance and correction of minor
rutting, which extends the life of the pavement in a cost effective way. Motorists should plan ahead
and allow extra time due to a one-lane restriction. Work zone signs, flag persons and a pilot vehicle
will be used during this operation. MoDOT urges motorists to proceed slowly through the work zone,
especially while driving on the fresh-laid surface.
Location: From the intersection of Route T to the intersection of Route 160.
Return to top
Phelps County
Contractor Crews
Route BB:
Contractor crews will be asphalt milling. One lane traffic with flaggers and speed limit is reduced to
35 MPH. While performing this function, crews and equipment are located directly on the roadway.
Motorists are urged to exercise caution when moving through the work zone.
Location: From the intersection of Forum Drive in Rolla, Mo. to the intersection of Route 68 in St.
James, Mo.
Route KK:
Contractor crews will be asphalt overlay with milling. One lane traffic with flaggers and speed limit is
reduced to 35 MPH. While performing this function, crews and equipment are located directly on the
roadway. Motorists are urged to exercise caution when moving through the work zone.
Location: From the intersection of Route 8 in St. James to the Crawford County line.
Roadway Maintenance
Outer Road Interstate 44:
MoDOT crews will be patching, which restores rideablility of the roadway surface. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: NORTH OUTER ROAD also known as International Road. From the intersection of Route
V to the intersection of Route 63.
Route 63:
MoDOT crews will be mowing, which controls roadside vegetation and improves sight distance.
Location: From the intersection of Route H to the intersection of Route W.
Route D:
MoDOT crews will be replacing drainage pipes near the roadway. Pipes periodically need replacing
to maintain proper drainage.
Location: From the Phelps County line to the city limits of Jerome, Mo.
Route D:
MoDOT crews will be paving over the roadway surface to restore a smooth ride. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: Crews will be working on the Gasconade River Bridge approach at Jerome, Mo.
Phelps County & Pulaski County
Roadway Maintenance
Various Routes:
MoDOT crews will perform vegetation control on the right-of-way, which improves sight distance.
Pulaski County
Roadway Maintenance
OUTER ROAD Interstate 44:
MoDOT crews will perform vegetation control on the right-of-way, which improves sight distance.
Location: OUTER ROADS - From the intersection of Route 28 to the intersection of Route 133.
Route BB:
MoDOT crews will be patching/paving, which restores rideablility of the roadway surface. While
performing this function, crews and equipment are located directly on the roadway. Motorists are
urged to exercise caution when moving past the work zone.
Location: From the intersection of Route 133 to the intersection of Route U.
Route P:
MoDOT crews will be paving over the roadway surface to restore a smooth ride. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: Crews will be working this entire route.
Route T:
MoDOT crews will perform edge rut repair work, which requires placing material at the edge of the
roadway and is necessary to reduce shoulder drop off. While performing this function, crews and
equipment are located directly on or near the roadway. Motorists are urged to exercise caution when
moving through the work zone.
Location: Crews will finish up this route.
Various Routes:
MoDOT crews will replace, install and or maintain roadway signs. While performing this function,
crews and equipment are located directly on or near the roadway. Motorists are urged to exercise
caution when moving through the work zone.
Return to top
Reynolds County
Roadway Maintenance
Return to top
Ripley County
Roadway Maintenance
Return to top
Shannon County
Roadway Maintenance
Return to top
Texas County
Contractor Crews
Route 63:
Contractor crews will replace the decks of these two bridges.
Location: The location over Arthur and Bender Creeks are part of The Safe and Sound project.
Traffic is controlled by signal devices. This area os known to locals as Twin Bridges.
Roadway Maintenance
Route 17:
MoDOT crews will be patching, which restores rideablility of the roadway surface. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: From the intersection of Route 63 to the intersection of Route 137.
Route 63:
MoDOT crews will be mowing, which controls roadside vegetation and improves sight distance.
Location: From Houston, Mo. city limits to the Phelps County line.
Route M:
MoDOT crews will be patching, which restores rideablility of the roadway surface. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: From the intersection of Route 17 to the intersection of Route 38.
Return to top
Washington County
Roadway Maintenance
Route 185:
MoDOT crews will do bridge maintenance to improve the section where the road and bridge meet
and prevent deterioration of the bridge deck or structure.
Location: The bridge located over Millers Swan Branch.
Route 185:
MoDOT crews will do bridge maintenance to improve the section where the road and bridge meet
and prevent deterioration of the bridge deck or structure.
Location: The bridge located over Indian Creek.
Route 185:
MoDOT crews will do bridge maintenance to improve the section where the road and bridge meet
and prevent deterioration of the bridge deck or structure.
Location: The bridge located over Bates Creek.
Route BB:
MoDOT crews will be sweeping to prevent small debris from entering enclosed drainage structures,
resulting in drainage issues, and improves the appearance of the roadway.
Location: From the intersection of Route C to the end of state maintenance.
Route CC:
MoDOT crews will be paving over the roadway surface to restore a smooth ride. While performing
this function, crews and equipment are located directly on the roadway. Motorists are urged to
exercise caution when moving past the work zone.
Location: From the intersection of Route 21 and Route 47 to the end of state maintenance.
Route U:
MoDOT crews will be sweeping to prevent small debris from entering enclosed drainage structures,
resulting in drainage issues, and improves the appearance of the roadway.
Location: From the intersection of Route 8 to the intersection of Route M.
Return to top
|
